Water Heater Repair Dallas's Blog

Dallas Homeowner advice and maintenance tips for water heaters.

History of Water Heaters

Just like a great deal of inventions we have today, the origins of the modern-day water heater can not effortlessly be traced back to just someone or society as its inventor. It may not be as mysterious as some inventions but it is definitely an invention that we make use of on a daily basis. Having hot water in our houses has actually helped make our lives less complicated and much healthier, and need to not be a thing we forget about.

It makes us chuckle a little when we checked out literature and see advertisements for tankless water heaters with the advertising message of “instantaneous hot water.” Certainly, it would certainly be terrific to have, and certainly it can conserve water that would run down the drain as one awaits the hot water to go through ones house plumbing pipes from the water heater to the tap; however are we that spoiled that we cannot wait several seconds for the hot water to come out? In this article we will be taking a look at several of the societies and people who have helped with the development of bringing hot water into the house for us to appreciate this modern-day benefit.

I remember watching old Western movies when I was a youngster and people would fill bath tubs with water heated from a stove or fire. This was a time consuming process, yet just what people did prior to having the development of a hot water heater. Over the past 100 years approximately, the good news is this procedure is not required any longer.

The Romans had their hot bath houses, which is normally considered an early form of water heating. They had an outstanding approach of heating their structures with circulating air heated from a fire underneath the flooring. Sort of like a very early form of radiant floor heating. They made use of fires to heat water in huge lead boilers situated over the heating systems. This was used for their very large bathroom residences which were like saunas.

Currently we are going to jump ahead to the English painter, Benjamin Waddy Maughan. He had the very first patented for a hot Maughans Water Heater The Geyserwater heater in 1868. In his design, natural gases heated the water however there was not a flue to remove the gas vapors that are created at the same time. This was the first time that gas, not a solid fuel was made use of in heating water. This development by Maughan had the cold water move through wires that were heated up by the hot gases of a burner. The hot water produced then entered into a sink or tub. It was called The Geyser, for the innovator had the concept from an actual water geyser.

Due to Maughan’s absence of ventilation, his water heater was not utilized inside the residence. Today, if a water heater is not vented properly, carbon monoxide can get into the home, which is a huge problem.

Maughan’s development did go on to influence Edwin Ruud, a Norwegian mechanical engineer who was the developer of the automatic storage hot water heater in 1889. During the 1880s in Pittsburgh, Rudd started the process of figuring out ways to produce hot water securely. The company he began, Ruud Manufacturing Company, is still a leading developer of water heaters today. By the time of Rudd’s death, he managed to transform the day-to-day hygienic practices of the majority of every American.Rudd Water Heater Patent

The following is from Rudd’s patent:

In a patent obtained by me December 30, 1890, No. 443,797, I have described and claimed certain improvements in Water-heaters, such improvements consisting, generally stated, in certain mechanism controlled by the temperature of the Water in the boiler for regulating the flow of gas to the burner employed for heating the boiler.

The present invention has for its object a construction of the regulating Inechanism, whereby the flow of gas to the burner may be more nearly proportioned to the quantity of cold water admitted; and in general terms the invention consists in the construction and combination of mechanical devices or elements, all as more fully hereinafter described and claimed.

In the accompanying drawing, forming a part of this specification, is shown a sectional elevation of a water-heater having my improvement applied thereto.  (read more. . .)

In England around 1895, Ewart & Son developed a gas fired hot water heater called the Royal Geyser. It would certainly be set up alongside a bath tub. It was gas fired and heated water which was entering into the bath tub. The warm water was blended with cold water to develop the temperature one desired. The development was a little delicate, for if the water was switched off before the pilot light being shut off, it would typically wreck the device.Ewart Royal Gyser Water Heater

The 1900s are thought as the golden age of water heaters. There are lots of business that started in the United States, supplying new ideas and modern technologies to constantly improve on the overall design. We have electric, gas, tankless and also solar hot water heater today, every one of which have a remarkable background for their innovations.

I stated tankless hot water heater in the introduction of this write-up. Though many people still consider them a current product in the plumbing field, but they were actually initially created in 1929! Stiebel-Eltron produced the initial electric tankless heater, or coil immersion heater.

Various other terms utilized to refer to hot water heater that are still around today are an electric water boiler, electric dispensing pot, geyser, or electric water urn.

There is a succinct past of the modern day water heater. Aim to remember that it is a residence device that does require a little care from time to time as well. Ideally our Dallas water heater clients will be able to not take their water heater for granted anymore and will see to it to follow correct upkeep steps.

Aquanta Water Heater Technology

It is well know, and the United States Department of Energy tells us this also, that heating water makes up for about 18 % of the typical home’s annual power usage. The only other home appliance that utilizes more is the heating and cooling system. With the typical tank hot water heater that the majority of house owners utilize, it is keeping 40 to 50 gallons of water warm all day regardless of when it is being utilized. Typically with this situation, 20 to 50 % of the energy being utilized is entirely wasted. Exactly what are some choices to aid suppress this power loss? The company Aquanta, use to be named Sunnovations has actually been inventing a viable solution for several years already.Aquanta Water Heater Controller

Sunnovations had a crowd-funding project in 2014 that did not make its full financing but that is alright with them for they had the ability to amass lots of interest from distribution companies that has become productive with a second go around now. Aquanta is presently taking pre-orders on a brand-new smart water-heater controller, which they hope will certainly be shipping in July this year.

Aquanta’s Chief Executive Officer Matthew Carlson says that the firm’s brand-new innovation has actually been field tested for over a year currently. It is unusual that other businesses have not started creating a similar device, specifically with the first crowd-funding campaign … despite it not being successful for them originally. Given that water heaters typically have a life of 8 to 12 years, it is not sensible to change it when it is functioning fine, however merely doesn’t have all the contemporary technology that a new hot water heater might feature. Lots of new hot water heater models are making use of smart modern technology features, however there is nothing that will work with any type of present hot water heater to “make it smart.” Sears recently launched a water heater controller that does work on some of its designs, however not every one of them and not on different companies hot water heaters.

The only other device that is just a little similar is a water heater timer. However it functions like a timer, turning the heater (and only electrical water heaters) on and off at certain times of the day; and not by means of smart technology.

One of the attributes of the Aquanta technology is that it will certainly “learn” what the water use patterns are within the house. Most people have the tendency to shower, use the dish washer and other hot water utilizing appliances around the very same time of day. The tool will work to change the water heater’s temperature to meet the need throughout peak times, and reduce the power usage during non-peak times.

The Aquanta will be located in addition to a water heater. A probe is installed behind the T&P valve port and then the probe is attached to the controller. A second sensor gets taped to the cold water supply. An optional third probe is made to find if there is a water leak from the heater also.

Finally, the controller has to be connected to a Wi-Fi network and house owners will install the smartphone app on a phone. The controller links to Aquanta’s cloud-based server and starts its job of learning the residence’s hot water use patterns. It is likewise possible to manually enter in the water use pattern too. So, it could manually and automatically manage the heater’s energy usage.

It is designed so a handy property owner may perform the installation him or her self. If a homeowner doesn’t feel up to the job, a plumbing specialist could certainly assist the firm mentions. Aquanta estimates it taking about 40 minutes for a home owner to finish the set up.

The device will work for the majority of water heaters, no matter the fuel type. It depends upon the source of power if it will work or not. There needs to be an electronic ignition system, which most all newer hot water heater will have. Old gas heaters might not though. Certainly take a look at the compatibility details on the company’s website here to find out.

Exactly how much power, and translated into money, can a resident save with the system? Right here is what Aquanta states on their site: “our data suggest that at least 20% and up to 50% of that energy in a typical home is wasted through ‘standby loss’. We are being careful to not overpromise, and have 3rd party testing underway to more specifically quantify the saving opportunity. However, our internal studies and modeling suggest that between 10-30% of water heating energy can be saved by intelligent control through Aquanta. The economic value of intelligent control of water heaters is much higher when factoring in peak or time-of-use pricing and utility peak demand reduction and similar incentives.” (read more here)

What others around the internet are saying:



Back to our blog. . .

Hot Water Heater Failure Warning Signs

The water heater in ones Dallas house should last a very long time without having to have a bunch of repairs done on it. There are many easy maintenance actions homeowners need to be doing to assist see to it will certainly last a truly long period of time without requiring numerous, if any, repair services, which we have already spoken about here.

There may come a day, however, when no, or not adequate hot water flows out of a tap like it has in the past. This short article is will take a look at just what to do when the water heater is not producing hot water. There are several reasons that this might happen, and numerous signs the hot water heater has considered that property owners usually will miss out on. We will not be judging homeowners for missing these indicators. However, there are some major things that will happen at some point, to let one know exactly what either a significant repair is required, or it is close to the end of the hot water heater’s life.

Exactly How Old is the Water Heater
If the home one stays in was bought, it is very easy to not know just how old the water heater is. Water heaters will certainly continue to function for years, many times much longer than the variety of years it is developed to run. As a result of this, it is simple to fail to remember the last time it was changed. So, if property owners provide it just a little focus, one will be amazed at the length of time the heater will certainly function well.Dallas Water Heater Repairs

There is a serial number on the water heater that should give the year it was made. If the heater is greater than ten years old and wants some major repairs, changing it needs to absolutely be considered.

Is There Discolored Water Coming From the Water Heater
Anytime the water from hot water faucets in the house has a blemished or rusty shade, it normally implies there is rust inside the water heater tank. This is not an excellent indicator to see. Once the interior of the storage tank begins to establish rust, it is an eventual truth that the tank will certainly corrode through completely. The important things to watch for is water leaking from the tank, for it will eventually cause a large mess if the water heater is not changed prior to the tank rusting through.

Nevertheless, there can be various other reasons that the water is blemished. We do not have space in this article to discuss them, but give us a call to review just what could be taking place.

The Water Heater is Making Unusual Noises
With the all-natural course of a hot water heater operating, sediment will establish on the interior of the tank. As it is warmed, and reheated, the sediment will harden, and can lead to reduced efficiency. It will take a lot more energy to heat water then. The more sediment that forms will begin to cause banging or popping sounds from inside the storage tank. They can get extremely loud also. It is not as big of an issue as it might sound to be. The sediment can be removed through flushing the tank. We would certainly like to do this process for you, however home owners have the ability to conduct it themselves. For safety and security reasons though, we would absolutely prefer to help.

There is Dampness Around the Water Heater
Anytime wetness begins to accumulate around the water heater it might show that there is a little leak or crack in the storage tank. When metal heats up, it expands and can form slight cracks. The older the heater is, the easier this may occur. Nonetheless, do not panic if you see dripping water, for it could possibly likewise be originating from a plumbing connection or fitting that is not tight. It could be originating from the T&P valve as well. Dripping water look like a bad things, however it could possibly likewise be a simple solution or connection tightening up.

If any of these points are taking place, call us to set up coming to see what the required water heater repair must be. It is best to let us take care of and servicing done to the system to make sure the guarantee is not invalidated by any kind of upkeep done by an unlicensed individual.

Water Heater Repairs Dallas Texass

From Visually.

Total Water Heater Maintenance Tasks

Sure there are lots of unlucky reports that homeowners have regarding water heater servicing of “stumbling out of bed to the chilly bath.” Well, we are not about to speak about how unfortunate of a condition that may be. In addition, we are going to assume that one realizes the straightforward notion of ensuring that ones water heater is serviced routinely in an effort to get the best out of its life span, and to make sure an emergency Water Heater Repair in Dallas is not needed. This can certainly help one cut costs on energy as well. All of that is wise we know. While not needed a lot of maintenance, hot water heaters should have some. We are amazed, although not shocked, by the amount of clients we come across who haven’t done any specific preservation to their water heater), listed below are the tasks one should be informed about in terms of routine maintenance.

The Probable Time frame a Dallas Water Heater Should LastHot Water Heater Repair in Dallas TX

8 to 10 years is the standard time frame a conventional gas water heater should last. There are many elements that can have an impact on the all around lifetime needless to say, but this is a very good standard. Most likely the most important factor which will influence the longevity of it is normally mineral deposits. The duties outlined are presented in hopes of assisting to reduce the buildup of mineral deposits in the storage tank of the water heater.

Ways to Prevent a Dallas Water Heater Repair

House owners, even the ones that really do not feel overly handy, can perform a great deal of water heater upkeep on their own. Though much of the time, a water heater will operate safe, just remember that they actually do run from electric power and/or gas. Thus suitable safety measures need to be put into practice by Dallas property owners. Remember to implement all these actions as an informative tutorial, for we would much rather explain all these with you in person.

First, the water heater’s power requires to be switched off previous to accomplishing any maintenance. Ones breaker box ought to have a switch labeled that indicates which breaker is the heater’s. Property owners that have a gas water heater, turn the gas cutoff counterclockwise in order to shut off the gas.

Anode rods, or also referred to as sacrificial anode rods, are the section of the heater that aids with preventing rusting inside the water tank. Many are made of aluminum while others are made out of magnesium around a steel wire. With time the external covering of the rods will wear away and they ought to be replaced when the steel wire is noticeable. They generally last about 5 years, though that might be reduced if ones water is soft. Ultimately, it is simpler and cost effective to have the anode rods changed, so that one can get a long life from the water heater storage tank. The rods should be looked at once a year basis.

Have a look at the subsequent video which shows the method of changing the anode rods:

Our next water heater part we are going to discuss will be the dip tubes. Only some water heaters have got them however. They should be inspected every 6 months for corrosion. To check it, remove it and check its length to the height of the water heater. It needs to be around 6″ to 8″ shorter than the storage tank. It’ll need replacing when it’s shorter than that, or simply reveals clues of breakage or crumbling.

Kinds of water heater flushes. Once more, mineral deposits are the primary cause of water heater breakdowns. Exactly how fast sediment establishes inside the storage tank depends on the quality of ones water. Eventually, this sediment can solidify, bringing about loud sounds from the storage tank, greatly reduce the effectiveness of the water heater, and perhaps block the drain valve. Preferably, every 6 months, but at a minimum every year, drain 1 or 2 gallons of water from the drain valve at the bottom of the hot water heater into a container or by a garden hose in a bucket outside the house. Examine to determine what amount of sediment is within the container once the water settles. If it appears pretty clear, that is good! If these kinds of small flushes are carried out 2 times yearly, one will possibly not need to execute a big flush as frequently. If the water appears really cloudy, a full flush needs to be executed. This is additionally a excellent occasion to guarantee the bottom drain valve of the storage tank is operating good and not leaking. These are commonly constructed from plastic and as time passes if they aren’t opened, they may get stuck or not close firmly, which explains why it truly is a good idea to open and close them during the small flush test.

The flushing technique can assist with removing hot water odors that can also occur also.

The reasons for flushing a water heater are outlined in the subsequent video:

For anyone that owns vacation homes or seasonal properties, one ought to empty the storage tank of all its water to help to stop any kind of flooding during the times the household is not lived in. Naturally, make sure to fill it up while the household is to be resided in once again.

Water pipe inspection. Look to be certain all water pipes do not have leaks or are harmed at all. It should be easy to see if there are any leaks coming from any piece of the water pipes or storage tank for there will be water underneath and/or near the device. Leaking water could potentially cause water damage to elements of ones household, so be sure all seems dry, specifically if the heater is placed inside the home and not in a garage.

Checking the T&P valve. Yearly, the T&P valve, or temperature and pressure relief valve, should be tested. The T&P valve’s purpose is to guard the water heater storage tank from too much pressure, and exploding. The owners manual should be looked over to be sure the proper methods are followed but listed here are the basic actions. A little water can come out of the valve and it’ll be really hot so be mindful. Lift up the lever and let go of it. Have a bucket prepared to catch any unwanted water which can come out. Additionally, the sound of pressure being released will be observed. The lever ought to snap back in position. If it doesn’t give it a try again. If after a number of tries it will not go back into place, a new valve will likely be required. The valve may possibly drip some water after doing that for a short period. If it fails to quit dripping after a number of hours let us know.

Through the years, a great deal of controversy has happened on exactly what the best temperature should be for any water heater. Producers ordinarily pre-programmed heaters to a setting of 140 degrees, which is indeed hotter than the majority of people may ever need to have. 120 degrees is the standard temperature and some actually go as low as 100 degrees. We are writing a lot more concerning this, however we highly recommend setting the temperature close to 120 degrees.

Steps For Gas Water Heaters

Every three months is a good time to inspect the gas venting system. All the fittings need to be checked to be certain they are tight, search for blockage, and look for damage to the vent piping, along with guaranteeing they’re absolutely free of rust and corrosion. Fumes are vented to the outside of the household with gas fired heaters. If these fumes make their way in the property it might be poisonous and a fire risk. Make sure anything combustible or corrosive is far from the exhaust ventilation to help prevent fires. Any loose, broken, or corroded sections of vent pipes will need being updated.

Take a look at the pilot light to carry out a visual test of just how it is working. The task of the pilot light is to ignite the gas burner which will heat water for the household. For a water heater to work at top performance, it is essential for the pilot light to be thoroughly clean. The color of the flame should really be blue with natural gas heaters. With propane heaters, the flame needs to be blue/green with only a little yellow at the tip. A weakened flame, a yellow flame, or a flame with a split flame on top implies that a modification is necessary.

Tips For Electric Water Heaters

Implementing insulation wraps or blankets covering the storage tank can certainly help keep a continuous temperature within the storage tank without using as much electrical power. In addition, with the heater not having to run as frequently will extend the life of the heating element given that it will not be used just as much. Regularly, verify the insulation cover to ensure it is attached and has not slipped or shifted on the water storage tank.

Routine evaluation of the heating element is very important and may help decrease the need for an unexpected repair. We aren’t going to go into the details for a complete examination at this point, however one will require a voltage/OHM meter to assure there exists a closed electrical circuit. Heating elements will need updating from time to time.

The area about a water heater requires to stay thoroughly clean of dirt. Primarily if the water heater is found in the garage, make sure to give the space a good sweeping often. The heater will perform a great deal better and be less likely to need to have a Dallas Hot Water Heater Repair if it is kept clean.

Replace Old Water Heaters With Energy Efficient Ones

Currently, virtually all water heaters produced have got a good amount of energy efficiency. In April 2015, stronger efficiency regulations were established in the U.S. for water heaters. Definitely, the better the heater, the longer the life one is certain to get from the unit using the right upkeep over the years. Don’t think twice to call Water Heater Repair Dallas to discuss water heater maintenance or maybe to help answer any problems on choosing the most suitable replacement water heater for ones home or office. Brand, model, and size really need to all be considered in the selection process and not simply implement the “bigger the better” slogan. For storage tank water heaters, it is a waste of energy to have a whole lot of surplus water getting constantly heated to a hot temperature if not getting made use of.

Minimize Water Heater Energy Usage

Water heaters are an out of sight, out of mind home appliance. Thankfully they are generally built to be so. Even with hot water heaters currently on the market being well designed with energy performance in mind, there are important things homeowners are capable of doing to extend ones water heating energy expenses even further.

Where to Lower Ones Dallas Water Heating Expenses

Verify the Thermostat Temperature SettingDallas Water Heating Cost Savings

If you have not seen the temperature level the hot water heater is set at, now would be a great time to do this. The factory setting is ordinarily about 140 degrees. Most homeowners don’t require it to be fixed that high except in cases where there are actually certain health worries one has. One will find additional information on water heater temperature options here. Even turning down the temperature by 10°F can lower energy expenses by about $6 per month. The typical house owner does not have to set the water heater higher than 120°, so look at turning yours down in case it is.

Lower Hot Water Usage

Listed here are some tips on how to decrease the hot water usage at home while not having a great deal of impact on how one lives.
Clean the bulk of clothing in the washer in cold water: A good number of laundry detergents are made for cold water use now therefore take full advantage of them.
Take showers as opposed to baths. On average, baths use 12-15 gallons of water, whereas showers typically only make use of 5-9 gallons.
If renovating or changing sink faucets, install dual handle faucets. Single handle faucet use some hot water when it is unnecessary. Even if the handle is moved straight up will cause hot water to be utilized. Single handle faucets can help eradicate using hot water whenever it is unnecessary.

Mend any water drips and also leaks. We will not go into detail right here, yet, even a small drip can become a substantial volume of water over the course of a month! Be certain to get any sort of faucet drip fixed at the earliest opportunity.

Adding Insulation to the Water Heater

It is smart to insulate the water heater and the hot water plumbing. Insulated wraps are available to cover the storage tank in order to keep the stored heated up water hot. New water heaters are produced with superb built-in insulation of the water storage tank, but every tiny bit can help, notably if the water heater can be found within a non-heated section of the house, such as a garage. All hot water pipes departing the water heater really should be wrapped in pipe insulation also. This can be especially critical for pipes that go through a garage, crawl space, or other area not warm.

Flush the Water Heater Regularly

Property owners must ensure they are accomplishing a little regular maintenance on the water heater to be sure it runs as smoothly as feasible. This will save on energy consumption and extend the lifetime of the hot water heater. Simply by flushing the storage tank and checking out the anode rod goes a long way in accomplishing this.

Install a More Efficient Water Heater

As soon as it is time for a new water heater, purchase one that is as energy efficient as you can afford to invest in. Over the long haul it is going to certainly pay off!

If you have got any thoughts on a Dallas water heater repair or even if you are uncertain whether it is getting close to needing a new water heater, do not wait to contact us.

How to Turn Off a Water Heater Fast

There can be occasions when Dallas house owners will need to switch off their hot water heater speedily, and it is very important that ones is aware of the suitable steps in doing so.

Emergency Dallas Water Heater Shut Off Steps

1. First switch off the Electricity or Gas

Gas – The thermostat dial must be switched from the “on” to the “off” position. This will shut off the gas at the water heater. If the odor of gas is ever noticed, get out of the household and contact the local gas company quickly.

Electric – Locate the breaker box location and switch off the breaker for the water heater. One may have a detach switch near the water heater. Make use of this to turn off the switch to turn off power to the water heater.

2. Turn Off the Water Supply

Look for the cold water pipe hooked up to the water heater and trace it back to the source or the wall. If it is an old style turn faucet handle, turn the handle clockwise up until it stops. This should shut off the water.

If you have a newer lever style ball valve pull or push the handle a 1/4 turn. This should shut off the water.

3. Open the Pressure Relief ValveDallas Water Heater Repairs

This is also occasionally called the T&P valve. Opening this will relieve the pressure in the water storage tank. A little water may come out of this any time it is opened up that may be hot so be careful! Raise the handle so it is sticking straight out or up.

4. Drain the Water Heater

It might be needed for the water heater to be drained of its water (this is optional). First, a garden hose must be hooked up to the drain valve located towards the bottom part on the water heater. Extend the hose outside. Bear in mind that the water being released of the hot water heater may have rust in it which could lead to injury to turf and plants, and will be hot. Within the home, let flow the hot side faucet in the sink closest to the water heater. This will release the vacuum seal and allow the water drain out of the water heater much easier. It should take anywhere from 10-30 minutes for the water heater to drain.

These are crucial plumbing emergency methods that we hope you will remember when having to face a Dallas water heater emergency repair.

Dallas Water Heater Repair Company Video

We absolutely love taking care of Water Heater Heater Repair in Dallas and look forward to helping so many of our friends and neighbors. Return here in our blog for we will continue to include advice on water heater maintenance and overall care.

We wish to share our new company introduction video with you below.

We are also accessible to assist you with all other kinds of plumbing repair you might need completed. Whether it be a leaking faucet, drain cleaning, toilet repair, or leak detection. We have witnessed practically any sort of emergency plumbing and water heater repair scenario you can envision and look forward to utilizing our honed troubleshooting abilities!

If it happens to be near to the period for a water heater replacement let us know so we can assist with deciding upon the most effective variety of water heater for your residence or workplace.